ºù«Ӱҵ

Journal articles

• Graham SJ, Gallagher E, Baxter GJ, Azakli Y, Weeks J, Gelmetti M, D'Souza N, Boettcher C, Roebuck B, Tsakiropoulos P & Utton C (2024) . Journal of Materials Research and Technology, 28, 3217-3224.
• Souza AC, Aristone F, Santana AN, Miyai A, Cione FC, Tsakiropoulos P & Rossi JL (2022) . Journal of Materials Research and Technology.
• Vellios N & Tsakiropoulos P (2022) . Materials, 15(17).
• Senkov ON, Tsakiropoulos PP & Couzinié J-P (2022) . Metals, 12(2).
• Tsakiropoulos P (2022) . Progress in Materials Science, 123, 100714-100714.
• Thandorn T & Tsakiropoulos P (2021) . Materials, 14(24).
• Vellios N, Keating P & Tsakiropoulos P (2021) . Metals, 11(11).
• Thandorn T & Tsakiropoulos P (2021) . Materials, 14(20).
• Tsakiropoulos P (2021) . Materials, 14(4).
• Souza AC, Rossi JL, Tsakiropoulos P & Aristone F (2021) . Metals and Materials International, 27(11), 4820-4830.
• Zhao J, Utton C & Tsakiropoulos P (2020) . Materials, 13(7).
• Xu Z, Utton C & Tsakiropoulos P (2020) . Materials, 13(1).
• Papadimitriou I, Utton C & Tsakiropoulos P (2019) . Materials, 12(19).
• Papadimitriou I, Utton C & Tsakiropoulos P (2019) . Materials, 12(17).
• Hernández-Negrete O & Tsakiropoulos P (2019) . Materials, 12(7).
• Souza AC, Aristone F, Rossi JL, Martinez LG, Cione FC, Tsakiropoulos P, Grandini CR & da Silva WF (2019) . International Journal of Refractory Metals and Hard Materials, 80, 216-224.
• Ghadyani M, Utton C & Tsakiropoulos P (2019) . Materials, 12(5).
• Ghadyani M, Utton C & Tsakiropoulos P (2019) . Materials, 12(2).
• Zacharis E, Utton C & Tsakiropoulos P (2018) . Materials, 11(12).
• Xu Z, Utton C & Tsakiropoulos P (2018) . Materials, 11(10).
• Nelson J, Ghadyani M, Utton C & Tsakiropoulos P (2018) . Materials, 11(9).
• Hernandez-Negrete O & Tsakiropoulos P (2018) . Microscopy and Microanalysis, 24(S1), 2258-2259.
• Tsakiropoulos P (2018) . Journal of Alloys and Compounds, 748, 569-576.
• Tsakiropoulos P (2018) . Materials, 11(5).
• Utton CA, Papadimitriou I, Kinoshita H & Tsakiropoulos P (2017) . Journal of Alloys and Compounds, 717, 303-316.
• Papadimitriou I, Utton C & Tsakiropoulos P (2017) . Science and Technology of Advanced Materials, 18(1), 467-479.
• Tsakiropoulos P (2017) . Journal of Alloys and Compounds, 708, 961-971.
• Faraji M, Wilcox DP, Thackray R, Howe AA, Todd I & Tsakiropoulos P (2015) . Metallurgical and Materials Transactions B, 46(6), 2490-2502.
• Papadimitriou I, Utton C & Tsakiropoulos P (2015) . Metallurgical and Materials Transactions A, 46(12), 5526-5536.
• Papadimitriou I, Utton C & Tsakiropoulos P (2015) . Computational Materials Science, 107, 116-121.
• Moris DN, Bakoyiannis C, Dousi E, Tsakiropoulos P, Tsakiropoulos N, Tsigris C, Perrea D & Georgopoulos S (2015) Novel protocol for creation and study of abdominal aortic aneurysm with porcine pancreatic elastase infusion in rats. Archives of Hellenic Medicine, 32(5), 636-644.
• Nurbanasari M, Tsakiropoulos P & Palmiere EJ (2015) . International Journal of Minerals, Metallurgy, and Materials, 22(3), 272-284.
• Papadimitriou I, Utton C & Tsakiropoulos P (2015) . Acta Materialia, 86, 23-33.
• Sofocleous K, Ogin SL, Tsakiropoulos P, Draconakis V & Doumanidis C (2014) . Journal of Composite Materials, 48(30), 3799-3813.
• Papadimitriou I, Utton C, Scott A & Tsakiropoulos P (2014) . Intermetallics, 54, 125-132.
• Faraji M, Wilcox DP, Thackray RP, Todd I, Howe AA & Tsakiropoulos P (2014) . Materials Science and Technology (United Kingdom), 30(10), 1177-1188.
• Papadimitriou I, Utton C, Scott A & Tsakiropoulos P (2014) . Metallurgical and Materials Transactions A.
• Nurbanasari M, Tsakiropoulos P & Palmiere EJ (2014) . Transactions of the Indian Institute of Metals.
• Tsakiropoulos P (2014) . Intermetallics, 55, 95-101.
• Nurbanasari M, Tsakiropoulos P & Palmiere EJ (2014) . ISIJ International, 54(7), 1667-1676.
• Li Z & Tsakiropoulos P (2013) . Journal of Alloys and Compounds, 550, 553-560.
• Li Z & Tsakiropoulos P (2012) . Intermetallics, 26, 18-25.
• Tsakiropoulos P, Zelenitsas K & Vellios N (2011) . Materials Research Society Symposium Proceedings, 1295, 367-372.
• Grammenos I & Tsakiropoulos P (2011) . Intermetallics, 19(10), 1612-1621.
• Li Z & Tsakiropoulos P (2011) . Materials Research Society Symposium Proceedings, 1295, 379-384.
• Grammenos I & Tsakiropoulos P (2011) Study of the role of Hf, Mo and W additions in the microstructure of Nb-20Si silicide based alloys. Intermetallics.
• Li Z & Tsakiropoulos P (2011) Study of the effect of Ti and Ge in the microstructure of Nb-24Ti-18Si-5Ge in situ composite. Intermetallics.
• Antipas GSE, Lekakou C & Tsakiropoulos P (2011) . Materials Characterization, 62(4), 402-408.
• Vellios N & Tsakiropoulos P (2010) . INTERMETALLICS, 18(9), 1729-1736.
• Grammenos I & Tsakiropoulos P (2010) . INTERMETALLICS, 18(8), 1524-1530.
• Li ZF & Tsakiropoulos P (2010) . INTERMETALLICS, 18(5), 1072-1078.
• Thandorn T & Tsakiropoulos P (2010) . INTERMETALLICS, 18(5), 1033-1038.
• Grammenos I & Tsakiropoulos P (2010) . INTERMETALLICS, 18(2), 242-253.
• Faraji M, Thackray R, Todd I & Tsakiropoulos P (2010) Classification and rating of inclusions in a high carbon steel. TMS Annual Meeting, 25-36.
• Faraji M, Thackray R, Todd I & Tsakiropoulos P (2010) Rating inclusions in an as-cast carbon steel. AISTech - Iron and Steel Technology Conference Proceedings, 841-848.
• Huang H, Shao G & Tsakiropoulos P (2008) . J ALLOY COMPD, 459(1-2), 185-190.
• Moslemzadeh N, Beamson G, Diplas S, Tsakiropoulos P & Watts JF (2008) . SURF SCI, 602(1), 216-225.
• Vellios N & Tsakiropoulos P (2007) . INTERMETALLICS, 15(12), 1529-1537.
• Vellios N & Tsakiropoulos P (2007) . INTERMETALLICS, 15(12), 1518-1528.
• Geng J & Tsakiropoulos P (2007) . INTERMETALLICS, 15(3), 382-395.
• Geng J, Tsakiropoulos P & Shao GS (2007) . INTERMETALLICS, 15(3), 270-281.
• Geng J, Tsakiropoulos P & Shao GS (2007) . INTERMETALLICS, 15(1), 69-76.
• Geng J, Tsakiropoulos P & Shao GS (2006) . MAT SCI ENG A-STRUCT, 441(1-2), 26-38.
• Kambakas K & Tsakiropoulos P (2006) . MAT SCI ENG A-STRUCT, 435, 187-192.
• Moslemzadeh N, Beamson G, Tsakiropoulos P, Watts JF, Haines SR & Weightman P (2006) . J ELECTRON SPECTROSC, 152(3), 148-151.
• Moslemzadeh N, Beamson G, Tsakiropoulos P, Watts JF, Haines SR & Weightman P (2006) . J ELECTRON SPECTROSC, 152(3), 129-133.
• Geng J, Shao G & Tsakiropoulos P (2006) . INTERMETALLICS, 14(7), 832-837.
• Zelenitsas K & Tsakiropoulos P (2006) . INTERMETALLICS, 14(6), 639-659.
• Zelenitsas K & Tsakiropoulos P (2006) . INTERMETALLICS, 14(5), 584-584.
• Geng J, Tsakiropoulos P & Shao G (2006) . INTERMETALLICS, 14(3), 227-235.
• Zelenitsas K & Tsakiropoulos P (2006) . MAT SCI ENG A-STRUCT, 416(1-2), 269-280.
• Moslemzadeh N, Beamson G, Tsakiropoulos P & Watts JF (2006) . SURF SCI, 600(2), 265-272.
• Drawin S, Heilmaier M, Jéhanno P, Wu X, Belaygue P, Tsakiropoulos P, Vilasi M, Guédou JY, Novak P, Delabrouille F , Jones N et al (2006) The EU-funded "ULTMAT" project: Ultra high temperature materials for turbines. ICAS-Secretariat - 25th Congress of the International Council of the Aeronautical Sciences 2006, 3, 1943-1952.
• Price AJ, Tsakiropoulos P, Wenman MR & Chard-Tuckey PR (2006) . American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 2006.
• Li HP & Tsakiropoulos P (2006) Droplet dynamic and solidification progress during rotating disk centrifugal atomization. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 16(5), 793-799.
• Zelenitsas K & Tsakiropoulos P (2005) . INTERMETALLICS, 13(10), 1079-1095.
• Mitchell T, Diplas S & Tsakiropoulos P (2005) . PHILOS MAG, 85(24), 2733-2756.
• Mitchell T, Diplas S & Tsakiropoulos P (2005) . J ALLOY COMPD, 392(1-2), 127-141.
• Pankhurst DA, Yuan Z, Nguyen-Manh D, Abel ML, Shao G, Watts JF, Pettifor DG & Tsakiropoulos P (2005) . PHYS REV B, 71(7).
• Beamson G, Haines SR, Moslemzadeh N, Tsakiropoulos P, Watts JF, Weightman P & Williams K (2005) . J ELECTRON SPECTROSC, 142(2), 151-162.
• Beamson G, Haines SR, Moslemzadeh N, Tsakiropoulos P, Weightman P & Watts JF (2004) . SURF INTERFACE ANAL, 36(3), 275-279.
• Xin L, Shao G, Wang F, Tsakiropoulos P & Li T (2003) . INTERMETALLICS, 11(7), 651-660.
• Abel ML, Tsakiropoulos P, Watts JF & Matthew JAD (2002) . SURF INTERFACE ANAL, 33(10-11), 775-780.
• Diplas S, Tsakiropoulos P, Shao G, Watts JF & Matthew JAD (2002) A study of alloying behaviour in the Ti-Al-V system. ACTA MATER, 50(8), 1951-1960.
• Mitchell T, Diplas S, Tsakiropoulos P, Watts JF & Matthew JAD (2002) . PHILOS MAG A, 82(4), 841-855.
• Johannesson B, Ogin SL, Surappa MK, Tsakiropoulos P, Brynjolfsson S & Thorbjornsson IO (2001) Effect of reinforcement geometry on matrix stresses in three aluminium metal matrix composite systems. SCRIPTA MATER, 45(8), 993-1000.
• Diplas S, Watts JF, Tsakiropoulos P, Shao G, Beamson G & Matthew JAD (2001) X-ray photoelectron spectroscopy studies of Ti-Al and Ti-Al-V alloys using CrK beta radiation. SURF INTERFACE ANAL, 31(8), 734-744.
• Arvanitis A, Diplas S, Tsakiropoulos P, Watts JF, Whiting MJ, Morton SA & Matthew JAD (2001) An experimental study of bonding and crystal structure modifications in MoSi2 and MoSi2+xAl (x=10 to 40 at% Al) via Auger parameter shifts and charge transfer calculations. ACTA MATER, 49(6), 1063-1078.
• Liu YQ, Shao G & Tsakiropoulos P (2001) On the oxidation behaviour of MoSi2. INTERMETALLICS, 9(2), 125-136.
• Diplas S, Watts JF, Morton SA, Beamson G, Tsakiropoulos P, Clark DT & Castle JE (2001) Electron spectroscopy with CrK beta photons: high energy XPS and X-AES. J ELECTRON SPECTROSC, 113(2-3), 153-166.
• Shao G, Nguyen-Manh D, Pettifor DG & Tsakiropoulos P (2000) omega-Phase formation in a rapidly solidified Cr-40 at.% Al alloy. PHIL MAG LETT, 80(11), 703-710.
• Shao G & Tsakiropoulos P (2000) On the omega phase formation in Cr-Al and Ti-Al-Cr alloys. ACTA MATER, 48(14), 3671-3685.
• Liu Y, Shao G & Tsakiropoulos P (2000) Thermodynamic reassessment of the Mo-Si and Al-Mo-Si systems. INTERMETALLICS, 8(8), 953-962.
• Tsakiropoulos GSP (2000) . Philosophical Magazine A, 80(3), 693-710.
• Shao G & Tsakiropoulos P (2000) On the structural evolution of Fe-Al laminates obtained by physical vapour deposition. PHILOS MAG A, 80(3), 693-710.
• Diplas S, Shao G, Tsakiropoulos P, Watts JF & Matthew JAD (2000) Calculations of charge transfer in Mg- and Al-transition metal alloys using the Auger parameter. SURF INTERFACE ANAL, 29(1), 65-72.
• Diplas S, Tsakiropoulos P & Brydson RMD (1999) Development of physical vapour deposited Mg-Zr alloys - Part 3 - Comparison of alloying and corrosion behaviour in Mg-V and Mg-Zr physical vapour deposited alloys. MATER SCI TECH SER, 15(12), 1373-1378.
• Diplas S, Tsakiropoulos P & Brydson RMD (1999) Development of physical vapour deposited Mg-Zr alloys - Part 1 - Characterisation of as deposited alloys. MATER SCI TECH-LOND, 15(12), 1349-1357.
• Diplas S, Tsakiropoulos P, Brydson RMD & Watts JF (1999) Development of physical vapour deposited Mg-Zr alloys - Part 2 - Characterisation of corrosion products. MATER SCI TECH-LOND, 15(12), 1359-1372.
• Shao G & Tsakiropoulos P (1999) Lattice parameters of TM(3d)-Al solid solutions. MAT SCI ENG A-STRUCT, 271(1-2), 286-290.
• Diplas S, Shao G, Morton SA, Tsakiropoulos P & Watts JF (1999) Calculations of charge transfer in Nb-17Al and V-50Al alloys, using the Auger parameter. INTERMETALLICS, 7(8), 937-946.
• Grosdidier T, Keramidas P, Shao G & Tsakiropoulos P (1999) Influence of 2.8% zirconium addition on the microstructure of rapidly solidified A1-8Fe-4Ni alloy. MAT SCI ENG A-STRUCT, 267(1), 60-70.
• Grosdidier T, Keramidas P, Fundenberger JJ, Wagner F & Tsakiropoulos P (1999) Influence of atomised powder characteristics on texture and microstructure development in extruded A1-8Fe-4Ni base alloys. MAT SCI ENG A-STRUCT, 267(1), 71-81.
• Shao G & Tsakiropoulos P (1999) Solidification structures of Ti-Al-Cr alloys. INTERMETALLICS, 7(5), 579-587.
• Diplas S, Tsakiropoulos P & Brydson RMD (1998) Development of Mg-V alloys by physical vapour deposition Part 1 - Bulk and surface characterisation. MATER SCI TECH SER, 14(7), 689-698.
• Diplas S, Tsakiropoulos P, Brydson RMD & Watts JF (1998) A study of charge transfer in vapour deposited Mg-V crystalline alloys via changes in Auger parameters. PHILOS MAG A, 77(4), 1067-1079.
• Coast-Smith L, Brydson R, Tsakiropoulos P, Hofer F, Grogger W, Dunford DV & Ward-Close CM (1998) Characterisation of thick film Ti/Al nanolaminates. MICRON, 29(1), 17-31.
• Diplas S, Tsakiropoulos P, Brydson RMD & Watts JF (1998) . Materials Science and Technology, 14(7), 699-711.
• Li HP & Tsakiropoulos P (1998) Calculation of powder particle size in rotating disc centrifugal atomization using wave theory. INT J NON-EQUILIB PR, 11(1), 55-70.
• Dodd SB, Morris S, Gardiner RW, Brydson RMD, Diplas S & Tsakiropoulos P (1998) Preliminary corrosion evaluation of some novel bulk electron beam evaporated magnesium alloys.. CORROS REV, 16(1-2), 159-174.
• Stone IC & Tsakiropoulos P (1998) The effect of reinforcement on the notched and unnotched room temperature tensile properties of Al-4wt%Cu/SiCp MMCs. MAT SCI ENG A-STRUCT, 241(1-2), 19-29.
• Shao G, Tsakiropoulos P & Miodownik AP (1997) Role of nucleation in phase competition in binary Ti-Al alloys. MATER SCI TECH SER, 13(10), 797-805.
• Shao G, Tsakiropoulos P & Miodownik AP (1997) . Materials Science and Technology, 13(10), 797-805.
• Shao G, Tsakiropoulos P, Manh DG & Pettifor DG (1997) Omega phase formation in a physically vapour-deposited Fe-Al alloy. PHIL MAG LETT, 76(3), 207-216.
• Stone IC, Wilson CE & Tsakiropoulos P (1997) The dependence of ageing on 3-dimensional spatial distribution of reinforcement in Al-4wt%Cu/SiCp MMCS. SCRIPTA MATER, 37(3), 305-310.
• Whiting MJ & Tsakiropoulos P (1997) Morphological evolution of lamellar structures: The Cu-Al eutectoid. ACTA MATER, 45(5), 2027-2042.
• Shao G & Tsakiropoulos P (1997) Ultra-thin twin plates and growth domains in the gamma phase as a product of the B2 phase decomposition in Ti-40at%Al-10at%V. PHILOS MAG A, 75(3), 657-676.
• Passa E, Shao G & Tsakiropoulos P (1997) Beta phase decomposition in Nb-17 at% Al alloy. PHILOS MAG A, 75(3), 637-655.
• Ward-Close CM, Goodwin PS, Hoo N, Tsakiropoulos P, Srisukhumbowornchai N, Senkov ON, Froes FH & Ovecoglu ML (1997) Microstructural control in gamma titanium aluminide intermetallic powder compacts. Proceedings of the Advanced Particulate Materials & Processes, 139-144.
• Passa E, Shao G & Tsakiropoulos P (1997) Phase transformations in Nb-17Al-xMo alloys. INTERMETALLICS, 5(3), 203-219.
• Stergiou A & Tsakiropoulos P (1997) The intermediate and high-temperature oxidation behaviour of (Mo,X)Si-2 (X=W,Ta) intermetallic alloys. INTERMETALLICS, 5(2), 117-126.
• Stergiou A, Tsakiropoulos P & Brown A (1997) The intermediate and high temperature oxidation behaviour of Mo(Si1-xAlx)(2) intermetallic alloys. INTERMETALLICS, 5(1), 69-81.
• Shao G, Tsakiropoulos P & Miodownik AP (1996) Ordering and decomposition of the beta phase in melt-spun TiAl1-xVx alloys. MAT SCI ENG A-STRUCT, 216(1-2), 1-10.
• Chrysanthou A, Jenkins RC, Whiting MJ & Tsakiropoulos P (1996) A study of the combustion synthesis of MoSi2 and MoSi2-matrix composites. J MATER SCI, 31(16), 4221-4226.
• Hoo N, Goodwin PS, Brydson RM, Tsakiropoulos P, WardClose CM & Froes FH (1996) Microstructural control in a gamma-TiAl alloy by MA and HIPing. JOM-J MIN MET MAT S, 48(7), 40-41.
• Brydson R, Hofer F, Upadhyaya D, Kothleitner G, WardClose M, Tsakiropoulos P & Froes S (1996) On the application of energy filtering TEM in materials science .2. Study of a fibre-reinforced metal matrix composite. MICRON, 27(2), 107-120.
• Chrysanthou A, Davies NW, Li J, Tsakiropoulos P & Chinyamakobvu OS (1996) Reaction synthesis of carbide-reinforced cast iron. J MATER SCI LETT, 15(6), 473-474.
• Davis SJ, Watts JF & Tsakiropoulos P (1996) Degassing of gas atomised Al-Li base alloy powders .2. Surface analysis studies. INT J RAPID SOLIDIF, 9(3), 211-240.
• Davis SJ, Tsakiropoulos P & Watts JF (1996) Degassing of gas atomised Al-Li base alloy powders .1. Mass spectrometry studies. INT J RAPID SOLIDIF, 9(3), 187-209.
• Upadhyaya D, Sandhu S, Tsakiropoulos P, WardClose CM & Froes FH (1995) Interfacial reactions in Ti-6Al-4V/sigma(SM 1240) fibre metal matrix composite. MATER SCI TECH SER, 11(11), 1156-1159.
• Upadhyaya D & Tsakiropoulos P (1995) Evaluation of the effect of sizing levels on transverse flexural and shear strengths of carbon epoxy composites. J MATER PROCESS TECH, 54(1-4), 17-20.
• Whiting MJ & Tsakiropoulos P (1995) Ledge mechanism of pearlite growth: Growth velocity of ferrous pearlite. MATER SCI TECH SER, 11(10), 977-984.
• Whiting MJ & Tsakiropoulos P (1995) . Materials Science and Technology, 11(10), 977-984.
• WHITING MJ & TSAKIROPOULOS P (1995) APPRAISAL OF RECENT WORK ON ROLE OF CRYSTALLOGRAPHY IN FERROUS AND NONFERROUS PEARLITE. MATER SCI TECH SER, 11(8), 717-727.
• SHAO G, TSAKIROPOULOS P & MIODOWNIK AP (1995) THE LAMELLAR GAMMA+BETA STRUCTURE IN AL-30TI-20V ALLOY. SCRIPTA METALL MATER, 33(1), 13-17.
• WHITING MJ & TSAKIROPOULOS P (1995) THE LEDGE MECHANISM OF PEARLITE GROWTH. SCRIPTA METALL MATER, 32(12), 1965-1966.
• SHAO G, MIODOWNIK AP & TSAKIROPOULOS P (1995) OMEGA-PHASE FORMATION IN V-AL AND TI-AL-V ALLOYS. PHILOS MAG A, 71(6), 1389-1408.
• Stone IC & Tsakiropoulos P (1995) . Materials Science and Technology, 11(3), 222-227.
• Stone IC & Tsakiropoulos P (1995) . Materials Science and Technology, 11(3), 213-221.
• STONE IC & TSAKIROPOULOS P (1995) CHARACTERIZATION OF SPATIAL-DISTRIBUTION OF REINFORCEMENT IN POWDER-METALLURGY ROUTE AL/SICP METAL-MATRIX COMPOSITES .1. TECHNIQUES BASED ON MICROSTRUCTURE. MATER SCI TECH SER, 11(3), 213-221.
• STONE IC & TSAKIROPOULOS P (1995) CHARACTERIZATION OF SPATIAL-DISTRIBUTION OF REINFORCEMENT IN POWDER-METALLURGY ROUTE AL/SICP METAL-MATRIX COMPOSITES .2. TECHNIQUES BASED ON LOCAL ENERGY-DISPERSIVE X-RAY-ANALYSIS. MATER SCI TECH SER, 11(3), 222-227.
• SHAO G, TSAKIROPOULOS P & MIODOWNIK AP (1995) PHASE COMPETITION AND SELECTION IN AL-30TI-20V ALLOY. INT J RAPID SOLIDIF, 9(1), 13-32.
• SHAO G, TSAKIROPOULOS P & MIODOWNIK AP (1995) PHASE-TRANSFORMATIONS IN TI-40AL-10V. INTERMETALLICS, 3(4), 315-325.
• STONE IC & TSAKIROPOULOS P (1994) THE EFFECT OF THE SPATIAL-DISTRIBUTION OF REINFORCEMENT ON THE FABRICATION AND HEAT-TREATMENT OF (AL-4WT-PERCENT-CU)-SIC PARTICLE METAL-MATRIX COMPOSITES. MAT SCI ENG A-STRUCT, 189(1-2), 285-290.
• UPADHYAYA D, WOOD M, WARDCLOSE CM, TSAKIROPOULOS P & FROES FH (1994) COATING AND FIBER EFFECTS ON SIC-REINFORCED TITANIUM. JOM-J MIN MET MAT S, 46(11), 62-67.
• UPADHYAYA D, TSAKIROPOULOS P, WARDCLOSE CM & FROES FH (1994) EFFECT OF FIBER SURFACE-MORPHOLOGY ON STABILITY OF C/TIBX COATINGS IN TI-6AL-4V/SIGMA (SM1240) FIBER METAL-MATRIX COMPOSITE. MATER SCI TECH SER, 10(10), 887-893.
• UPADHYAYA D, BRYDSON R, WARDCLOSE CM, TSAKIROPOULOS P & FROES FH (1994) AS RECEIVED TI-6AI-4V/SIGMA/SIC FIBER-COMPOSITE. MATER SCI TECH SER, 10(9), 797-806.
• SHAO G & TSAKIROPOULOS P (1994) PREDICTION OF PHASE SELECTION IN RAPID SOLIDIFICATION USING TIME-DEPENDENT NUCLEATION THEORY. ACTA METALL MATER, 42(9), 2937-2942.
• FAN Z & TSAKIROPOULOS P (1994) ON THE MEAN INTERNAL-STRESSES IN 2-DUCTILE-PHASE ALLOYS. MAT SCI ENG A-STRUCT, 184(1), 57-64.
• WHITING MJ & TSAKIROPOULOS P (1994) THE LEDGE MECHANISM OF PEARLITE GROWTH - SOME THOUGHTS ON THE SOLUTION TO THE KINETIC PROBLEM. SCRIPTA METALL MATER, 30(8), 1031-1036.
• SHAO G, GROSDIDIER T & TSAKIROPOULOS P (1994) THE METASTABLE DISORDERED GAMMA (TIAL) PHASE AND ITS ORDERING PROCESS IN A RAPIDLY SOLIDIFIED EQUIATOMIC TIAL ALLOY WITH VANADIUM ADDITION. SCRIPTA METALL MATER, 30(7), 809-814.
• Stergiou A & Tsakiropoulos P (1994) . MRS Proceedings, 364.
• Baliga CB, Tsakiropoulos P, Rawson M & Miodownik AP (1994) Microstructure property relationships in PM Fe-Cr-B alloys. Proceedings of the Symposium on High Performance Metal and Ceramic Matrix Composites, 99-111.
• FAN Z, TSAKIROPOULOS P & MIODOWNIK AP (1994) A GENERALIZED LAW OF MIXTURES. J MATER SCI, 29(1), 141-150.
• FAN Z, MIODOWNIK AP & TSAKIROPOULOS P (1993) MICROSTRUCTURAL CHARACTERIZATION OF 2-PHASE MATERIALS. MATER SCI TECH SER, 9(12), 1094-1100.
• Fan Z, Miodownik AP & Tsakiropoulos P (1993) . Materials Science and Technology, 9(12), 1094-1100.
• FAN Z, TSAKIROPOULOS P & MIODOWNIK AP (1993) YIELD STRENGTH OF 2 DUCTILE-PHASE ALLOYS. MATER SCI TECH SER, 9(10), 863-868.
• Fan Z, Tsakiropoulos P & Miodownik AP (1993) . Materials Science and Technology, 9(10), 863-868.
• WHITING MJ & TSAKIROPOULOS P (1993) ON THE LEDGE MECHANISM OF PEARLITE GROWTH - THE CU-AL LAMELLAR EUTECTOID. SCRIPTA METALL MATER, 29(3), 401-406.
• BALIGA CB & TSAKIROPOULOS P (1993) DEVELOPMENT OF CORROSION-RESISTANT MAGNESIUM ALLOYS .1. CHARACTERIZATION OF SPLAT QUENCHED MG-10AL AND MG-16AL ALLOYS. MATER SCI TECH SER, 9(6), 507-511.
• BALIGA CB & TSAKIROPOULOS P (1993) DEVELOPMENT OF CORROSION-RESISTANT MAGNESIUM ALLOYS .2. STRUCTURE OF CORROSION PRODUCTS ON RAPIDLY SOLIDIFIED MG-16AL ALLOYS. MATER SCI TECH SER, 9(6), 513-519.
• BAKER MA & TSAKIROPOULOS P (1993) THE APPLICATION OF CHEMICAL-STATE AES AND SAM TO THE EXAMINATION OF SPRAY-FORMED ALUMINUM-ALLOY FRACTURE SURFACES. SURF INTERFACE ANAL, 20(7), 589-594.
• NORMAN AF & TSAKIROPOULOS P (1993) STRENGTHENING MECHANISMS IN POWDER-METALLURGY AL-LI-HF ALLOYS. MATER SCI TECH SER, 9(3), 228-234.
• Norman AF & Tsakiropoulos P (1993) . Materials Science and Technology, 9(3), 228-234.
• FAN Z, TSAKIROPOULOS P, SMITH PA & MIODOWNIK AP (1993) EXTENSION OF THE HALL-PETCH RELATION TO 2-DUCTILE-PHASE ALLOYS. PHILOS MAG A, 67(2), 515-531.
• SHAO G, TSAKIROPOULOS P & MIODOWNIK AP (1993) THE MICROSTRUCTURE OF RAPIDLY SOLIDIFIED AL-8FE-4NI-1MO ALLOY POWDERS. INT J RAPID SOLIDIF, 8(1), 41-64.
• FAN ZY, TSAKIROPOULOS P & MIODOWNIK AP (1992) PREDICTION OF YOUNG MODULUS OF PARTICULATE 2 PHASE COMPOSITES. MATER SCI TECH SER, 8(10), 922-929.
• Fan Z, Tsakiropoulos P & Miodownik AP (1992) . Materials Science and Technology, 8(10), 922-929.
• Stone IC & Tsakiropoulos P (1992) Cooling rates in gas atomised Al-4wt%Cu alloy powders. International journal of rapid solidification, 7(3), 177-190.
• STONE IC & TSAKIROPOULOS P (1992) COOLING RATES IN GAS ATOMIZED AL-4WT-PERCENT-CU ALLOY POWDERS. INT J RAPID SOLIDIF, 7(3), 177-190.
• NORMAN AF & TSAKIROPOULOS P (1992) RAPID SOLIDIFICATION OF AL-HF ALLOYS - ANALYSIS OF STRENGTH OF EXTRUDED HIGH-PRESSURE GAS ATOMIZED POWDERS. INT J RAPID SOLIDIF, 7(2), 109-126.
• ADKINS NJE & TSAKIROPOULOS P (1991) DESIGN OF POWDER-METALLURGY ALUMINUM-ALLOYS FOR APPLICATIONS AT ELEVATED-TEMPERATURES .2. TENSILE PROPERTIES OF EXTRUDED AND CONFORMED GAS ATOMIZED POWDERS. MATER SCI TECH SER, 7(5), 419-426.
• ADKINS NJE & TSAKIROPOULOS P (1991) DESIGN OF POWDER-METALLURGY ALUMINUM-ALLOYS FOR APPLICATIONS AT ELEVATED-TEMPERATURES .1. MICROSTRUCTURE OF HIGH-PRESSURE GAS ATOMIZED POWDERS. MATER SCI TECH SER, 7(4), 334-340.
• BALIGA CB, TSAKIROPOULOS P & JEYNES C (1991) SURFACE CONTAMINATION AND ITS EFFECT ON THE CORROSION OF RAPIDLY SOLIDIFIED MG-AL ALLOY SPLATS. J MATER SCI, 26(6), 1497-1504.
• Baliga CB & Tsakiropoulos P (1991) On the development of corrosion resistant Mg-Al alloys. Light-Weight Alloys for Aerospace Applications II, 439-451.
• Tsakiropoulos P & Adkins NJE (1991) Design of powder metallurgy aluminium alloys. Light-Weight Alloys for Aerospace Applications II, 297-310.
• NORMAN AF & TSAKIROPOULOS P (1991) RAPID SOLIDIFICATION OF AL-HF ALLOYS - SOLIDIFICATION MICROSTRUCTURES AND DECOMPOSITION OF SOLID-SOLUTIONS. INT J RAPID SOLIDIF, 6(3-4), 185-213.
• ADKINS NJE & TSAKIROPOULOS P (1991) SOLIDIFICATION OF HIGH-PRESSURE GAS ATOMIZED AL-CR ALLOY POWDERS .1. DEPENDENCE OF NUCLEATION TEMPERATURE ON NUCLEANT POTENCY. INT J RAPID SOLIDIF, 6(2), 87-100.
• ADKINS NJE & TSAKIROPOULOS P (1991) SOLIDIFICATION OF HIGH-PRESSURE GAS ATOMIZED AL-CR ALLOY POWDER PARTICLES .2. DISTRIBUTION OF INTERMETALLICS IN THE POWDER PARTICLES. INT J RAPID SOLIDIF, 6(2), 101-114.
• ADKINS NJE, NORMAN AF & TSAKIROPOULOS P (1991) SPECIMEN PREPARATION FOR TEM STUDIES OF RAPIDLY SOLIDIFIED POWDERS. INT J RAPID SOLIDIF, 6(1), 77-86.
• CARNEY TJ, TSAKIROPOULOS P, WATTS JF & CASTLE JE (1990) OXIDATION AND SURFACE SEGREGATION IN RAPIDLY SOLIDIFIED AL-ALLOY POWDERS. INT J RAPID SOLIDIF, 5(2-3), 189-217.
• JUAREZISLAS JA, TSAKIROPOULOS P & JONES H (1990) THE RESPONSE OF AL-CR-HF ALLOYS TO EXTENDED SOAKING TREATMENT AT 0.7 TM. INT J RAPID SOLIDIF, 5(2-3), 177-188.
• PAN LM, SAUNDERS N & TSAKIROPOULOS P (1989) PREFERENTIAL NUCLEATION IN UNDERCOOLED LIQUID ALUMINUM ALLOYS-II. MATER SCI TECH SER, 5(6), 609-612.
• Pan L-M, Saunders N & Tsakiropoulos P (1989) . Materials Science and Technology, 5(6), 609-612.
• Carney TJ, Castle JE, Tsakiropoulos P, Waldron MB & Watts JF (1989) Surface studies of rapidly solidified aluminium alloy powder. Key Engineering Materials, 29-31, 291-302.
• Adkins NJE, Goodwin PS, Tsakiropoulos P & Waldron MB (1989) Powder metallurgy research at the University of Surrey. Key Engineering Materials, 29-31, 783-792.
• BALIGA CB, TSAKIROPOULOS P & WATTS JF (1989) CORROSION PRODUCTS FORMED ON A RAPIDLY SOLIDIFIED MG-AL ALLOY. INT J RAPID SOLIDIF, 4(4), 231-250.
• ADKINS NJE, GOODWIN PS & TSAKIROPOULOS P (1988) A TECHNIQUE FOR EVALUATING ALUMINUM-ALLOYS FOR HIGH-PRESSURE GAS ATOMIZATION. MATER SCI ENG, 98, 115-117.
• TSAKIROPOULOS P, PRATT RC, JONES H, RESTALL JE & GARDINER RW (1988) DEVELOPMENT OF AL-CR-X AND AL-CR-ZR-X ALLOYS BY RAPID SOLIDIFICATION FROM THE MELT. MATER SCI ENG, 98, 143-147.
• ADKINS NJE, SAUNDERS N & TSAKIROPOULOS P (1988) RAPID SOLIDIFICATION OF PERITECTIC ALUMINUM-ALLOYS. MATER SCI ENG, 98, 217-219.
• SAUNDERS N & TSAKIROPOULOS P (1988) PREFERENTIAL NUCLEATION IN UNDERCOOLED LIQUID ALUMINUM-ALLOYS. MATER SCI TECH SER, 4(2), 157-160.
• GOODWIN PS, TSAKIROPOULOS P & SAUNDERS N (1988) THE MICROSTRUCTURE OF RAPIDLY SOLIDIFIED AL-CR-FE POWDER. MATER SCI ENG, 98, 61-64.
• PRATT RCA, TSAKIROPOULOS P, JONES H, GARDINER RW & RESTALL JE (1987) EFFECT OF DISPERSOID-FORMING ADDITIONS ON THE RESPONSE TO HEAT-TREATMENT OF SPLAT-QUENCHED AL-LI-X ALLOYS. J PHYS-PARIS, 48(C-3), 341-346.
• BUCKLE ER & TSAKIROPOULOS P (1986) INTERNAL STRUCTURE OF SOLIDIFIED AEROSOL DROPLETS - ZINC. J MATER SCI LETT, 5(10), 981-983.
• BUCKLE ER, MAWELLA KJA & TSAKIROPOULOS P (1986) PARTICLE CONDENSATION IN THE VAPOR EMITTED BY A HEATED SOURCE. J COLLOID INTERF SCI, 112(1), 42-53.
• Buckle ER, Tsakiropoulos P & Pointon KC (1986) . International Materials Reviews, 31(1), 258-288.
• BUCKLE ER, TSAKIROPOULOS P & POINTON KC (1986) PREPARATION AND PROPERTIES OF METALLIC AEROSOL-PARTICLES. INT MATER REV, 31(6), 258-288.
• Buckle ER, Tsakiropoulos P & Pointon KC (1986) . International Materials Reviews, 31(1), 258-288.
• TSAKIROPOULOS P (1985) SOLIDIFICATION OF DROPLETS. MATER LETT, 3(12), 508-512.
• BUCKLE ER & TSAKIROPOULOS P (1985) CONDENSATION AND CRYSTAL MORPHOLOGY OF BISMUTH AEROSOLS. J MATER SCI, 20(10), 3691-3696.
• TSAKIROPOULOS P (1984) ON THE SOLIDIFICATION OF DROPLETS IN CADMIUM AND ZINC AEROSOLS BY THE FLOATING RAFT MECHANISM. J MATER SCI LETT, 3(12), 1095-1096.
• TSAKIROPOULOS P (1984) THE INFLUENCE OF ANISOTROPY ON THE LIQUID SOLID-PHASE TRANSITIONS IN PURE METALS .1. THE CASE OF CD AND ZN. J CRYST GROWTH, 69(2-3), 449-455.
• Buckle ER & Tsakiropoulos P (1981) . Analytical Proceedings, 18(2), 73-76.
• BUCKLE ER & TSAKIROPOULOS P (1981) EVAPORATION BEHAVIOR OF METALLIC AEROSOL CONDENSATES. J MICROSC-OXFORD, 124(OCT), 89-93.
• BUCKLE ER & TSAKIROPOULOS P (1981) SOLIDIFICATION OF METALLIC AEROSOL DROPLETS FROM FLOATING RAFTS - A TEST OF THE SPIRAL GROWTH-MECHANISM FOR CD AND ZN. J MATER SCI, 16(4), 1103-1107.
• BUCKLE ER, POINTON KC & TSAKIROPOULOS P (1980) CRYSTALLOGRAPHY OF METALLIC AEROSOL PRECIPITATES .2. SOLIDIFICATION OF DROPLETS TO SPHERICAL CRYSTALS IN CADMIUM AND ZINC. J MATER SCI, 15(11), 2921-2924.
• BUCKLE ER & TSAKIROPOULOS P (1979) CRYSTALLOGRAPHY OF METALLIC AEROSOL PRECIPITATES - DENDRITIC ORIGIN OF HEXAGONAL PRISMS IN CD AND ZN. J MATER SCI, 14(6), 1421-1424.
• Tankov N, Utton C & Tsakiropoulos P () . Alloys, 3(3), 190-231.
• Tankov N, Utton C & Tsakiropoulos P () . Alloys, 3(1), 59-95.
• Tsakiropoulos P () . Alloys, 2(3), 184-212.
• Tsakiropoulos P () . Metals, 13(6), 1023-1023.
• Tsakiropoulos P () . Materials, 15(23), 8479-8479.
• Zacharis E, Utton C & Tsakiropoulos P () . Materials, 15(13), 4596-4596.
• Tsakiropoulos P () . Materials, 15(8), 2832-2832.
• Zhao J, Utton C & Tsakiropoulos P () . Materials, 13(20), 4548-4548.
• Zhao J, Utton C & Tsakiropoulos P () . Materials, 13(17), 3719-3719.
• Hernández-Negrete O & Tsakiropoulos P () . Materials, 13(3), 722-722.
• Li Z & Tsakiropoulos P () . Materials, 12(19), 3120-3120.
• Li Z & Tsakiropoulos P () . Materials, 12(17), 2655-2655.
• Hernández-Negrete & Tsakiropoulos () . Materials, 12(16), 2531-2531.
• Hernández-Negrete O & Tsakiropoulos P () . Materials, 12(11), 1806-1806.
• McCaughey C & Tsakiropoulos P () . Materials, 11(6), 967-967.
• Tsakiropoulos P () . Materials, 11(4), 592-592.
• Tsakiropoulos P () . Materials, 11(3), 395-395.
• Tsakiropoulos P () . Materials, 11(1), 69-69.
• Nurbanasari M, Tsakiropoulos P & Palmiere EJ () . Advanced Materials Research, 1043, 154-158.
• Nurbanasari M, Tsakiropoulos P & Palmiere EJ () . Advanced Materials Research, 1043, 159-164.
• Nurbanasari M, Tsakiropoulos P & Palmiere EJ () . Advanced Materials Research, 1043, 149-153.
• Palmiere EJ, Nurbanasari & Tsakiropoulos P () Influence of high temperature deformation and double tempering on the microstructure of a H21 tool steel. Materials Science and Engineering A.

Chapters

• Adkins NJE & Tsakiropoulos P (1991) , Rapidly Quenched Materials (pp. 767-770). Elsevier
• ADKINS NJE, SAUNDERS N & TSAKIROPOULOS P (1988) , Rapidly Quenched Metals 6 (pp. 217-219). Elsevier
• GOODWIN PS, TSAKIROPOULOS P & SAUNDERS N (1988) , Rapidly Quenched Metals 6 (pp. 61-64). Elsevier
• ADKINS NJE, GOODWIN PS & TSAKIROPOULOS P (1988) , Rapidly Quenched Metals 6 (pp. 115-117). Elsevier
• TSAKIROPOULOS P, PRATT RC, JONES H, RESTALL JE & GARDINER RW (1988) , Rapidly Quenched Metals 6 (pp. 143-147). Elsevier
• Tsakiropoulos P () John Wiley & Sons, Ltd
• Grosdidier T, Keramidas P & Tsakiropoulos P () , Materials Development and Processing - Bulk Amorphous Materials, Undercooling and Powder Metallurgy (pp. 265-270). Wiley-VCH Verlag GmbH & Co. KGaA
• Shao G & Tsakiropoulos P () , Intermetallics and Superalloys (pp. 330-335). Wiley-VCH Verlag GmbH & Co. KGaA
• Arvanitis A, Whiting MJ & Tsakiropoulos P () , Intermetallics and Superalloys (pp. 345-349). Wiley-VCH Verlag GmbH & Co. KGaA

Conference proceedings papers

• DoÄŸan ÖN, Liu X, Tsakiropoulos P, Jablonski PD & Lin J (2015) . Metallurgical and Materials Transactions A, Vol. 46(2) (pp 556-556)
• Diplas S, Moslemzadeh N, Watts JF, Beamson G & Tsakiropoulos P (2010) . SURFACE AND INTERFACE ANALYSIS, Vol. 42(6-7) (pp 722-725)
• Moslemzadeh N, Beamson G, Haines SR, Tsakiropoulos P, Watts JF & Weightman P (2006) . SURFACE AND INTERFACE ANALYSIS, Vol. 38(4) (pp 703-706)
• Kambakas K & Tsakiropoulos P (2005) . MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 413 (pp 538-544)
• Shao G, Lu B, Liu YQ & Tsakiropoulos P (2005) . INTERMETALLICS, Vol. 13(3-4) (pp 409-414)
• Moslemzadeh N, Watts JF, Tsakiropoulos P, Beamson G, Haines S & Weightman P (2004) . SURFACE AND INTERFACE ANALYSIS, Vol. 36(8) (pp 1119-1121)
• Tsakiropoulos P & Shao G (2004) . MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 375-77 (pp 201-206)
• Shao G & Tsakiropoulos P (2004) . MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 375-77 (pp 556-560)
• Zaroulias A, Shao GS & Tsakiropoulos P (2003) Synthesis and characterisation of oxidation resistant coating for gamma TiAl. GAMMA TITANIUM ALUMINIDES 2003 (pp 567-574)
• Zaroulias A, Shao GS & Tsakiropoulos P (2003) Development of oxidation resistant coatings based on gamma TiAl. SURFACE ENGINEERING: IN MATERIALS SCIENCE II (pp 273-281)
• Abel ML, Tsakiropoulos P, Watts JF & Matthew JAD (2002) . SURFACE AND INTERFACE ANALYSIS, Vol. 34(1) (pp 360-364)
• Wang SZ, Shao G, Tsakiropoulos P & Wang F (2002) Phase selection in magnetron sputter-deposited TiAl alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 329 (pp 141-146)
• Shao G & Tsakiropoulos P (2002) Prediction of omega phase formation in Ti-Al-X alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 329 (pp 914-919)
• Kench PJ, Shannon JM, Shao G, Tsakiropoulos P & Silva SRP (2001) Ion beam synthesis of gallium nitride. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, Vol. 175 (pp 678-682)
• Shao G & Tsakiropoulos P (2001) Prediction of omega phase formation in TiAl-X alloys. TITANIUM ALLOYS AT ELEVATED TEMPERATURE: STRUCTURAL DEVELOPMENT AND SERVICE BEHAVIOUR, Vol. 755(4) (pp 291-300)
• Wang SZ, Shao G, Grosdidier T, Bolle B, Wang F & Tsakiropoulos P (2001) Structural development in sputter deposited TiAlCr coatings. STRUCTURAL INTERMETALLICS 2001 (pp 663-668)
• Arvanitis A, Whiting M & Tsakiropoulos P (2001) A study of the oxidation behaviour of Mo-Si-Al intermetallic alloys at low, intermediate and high temperatures. STRUCTURAL INTERMETALLICS 2001 (pp 561-570)
• Grosdidier T, Keramidas P & Tsakiropoulos P (2001) Formation and characteristics of banded microstructures in a consolidated AL-Fe based alloy obtained from RS powders. ADVANCED POWDER TECHNOLOGY II, Vol. 189-1 (pp 509-514)
• Li HP, Tsakiropoulos P & Johnson T (2001) Centrifugal atomisation of alloys. ADVANCED POWDER TECHNOLOGY II, Vol. 189-1 (pp 245-251)
• Coomber E, Whiting MJ & Tsakiropoulos P (2000) Eutectoid decomposition in three Ti-Co alloys. NUCLEATION AND GROWTH PROCESSES IN MATERIALS, Vol. 580 (pp 93-98)
• Diplas S & Tsakiropoulos P (2000) Studies of Mg-V and Mg-Zr alloys. MAGNESIUM TECHNOLOGY 2000 (pp 175-180)
• Mitchell T & Tsakiropoulos P (2000) Microstructure property studies of in situ mechanically worked PVD Mg-Ti alloys. MAGNESIUM TECHNOLOGY 2000 (pp 169-174)
• Shao G & Tsakiropoulos P (1999) Interplay of thermodynamics and transformation kinetics on microstructural development in TiAl-based alloys. GAMMA TITANIUM ALUMINIDES 1999 (pp 189-194)
• Shao G, Nguyen-Manh D, Tsakiropoulos P & Pettifor DG (1999) How stable is the omega phase in TiAl-X alloys?. GAMMA TITANIUM ALUMINIDES 1999 (pp 155-159)
• Tsakiropoulos P (1999) Microstructure-property studies in spray formed Al alloys. ADVANCED POWDER TECHNOLOGY, Vol. 299-3 (pp 392-397)
• Scholl R, Tsakiropoulos P, Bohm A & Kieback B (1999) Properties of silicides and silicide composites densified by pressureless reactive sintering. ADVANCED POWDER TECHNOLOGY, Vol. 299-3 (pp 165-170)
• Sandhu S, Tsakiropoulos P, Wood MJ & WardClose CM (1997) Interfacial studies in titanium aluminide SiCf composites. CMMC 96 - PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON CERAMIC AND METAL MATRIX COMPOSITES, PTS 1 AND 2, Vol. 127- (pp 671-678)
• Diplas S, Tsakiropoulos P, Brydson RMD, Dodd S & Gardiner RW (1997) Characterisation of physical vapour deposited Mg-V alloys. PROCEEDINGS OF THE THIRD INTERNATIONAL MAGNESIUM CONFERENCE (pp 285-298)
• Baliga CB, Tsakiropoulos P, Dodd SB & Gardiner RW (1997) Physical vapour deposited Mg-Ti alloys. PROCEEDINGS OF THE THIRD INTERNATIONAL MAGNESIUM CONFERENCE (pp 627-636)
• Baker MA, Tsakiropoulos P & Norman AF (1997) Porosity and oxide distribution in spray-formed Al-5Cr-1.5Zr alloy. JOURNAL OF MATERIALS SYNTHESIS AND PROCESSING, Vol. 5(1) (pp 105-110)
• Li HP & Tsakiropoulos P (1997) Calculation of powder size in centrifugal atomization and spray forming. JOURNAL OF MATERIALS SYNTHESIS AND PROCESSING, Vol. 5(1) (pp 117-121)
• Norman AF & Tsakiropoulos P (1997) Study of the microstructure and properties of spray-formed Al-5Cr-1.5Zr. JOURNAL OF MATERIALS SYNTHESIS AND PROCESSING, Vol. 5(1) (pp 59-63)
• CoastSmith L, Brydson R, Tsakiropoulos P, Dunford D & WardClose CM (1996) Synthesis and characterisation of titanium/aluminum nanolaminates. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol. 156(1-3) (pp 17-18)
• Keramidas P, Haag R, Grosdidier T, Tsakiropoulos P & Wagner F (1996) Influence of Zr addition on the microstructure and properties of PM Al-8Fe-4Ni alloy. ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, Vol. 217 (pp 629-634)
• Hoo N, Froes FH, Goodwin PS, WardClose CM, Brydson RM & Tsakiropoulos P (1996) Synthesis of a 8-TiAl alloy by mechanical alloying and hot isostatic pressing. HOT ISOSTATIC PRESSING, CONFERENCE PROCEEDINGS (pp 91-95)
• Shao G & Tsakiropoulos P (1996) Calculation of phase competition and selection in solidification using a combined nucleation and calphad approach. THERMODYNAMICS AND KINETICS OF PHASE TRANSFORMATIONS, Vol. 398 (pp 45-50)
• Shao G, Tsakiropoulos P & Shen N (1996) Solidification of Al-7Si-2Ti-2Ce alloy ribbons. ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, Vol. 217 (pp 213-218)
• Shao G & Tsakiropoulos P (1996) Transient nucleation effects on extension of solid solubility in Al-Ti and Al-Zr alloys. ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, Vol. 217 (pp 229-234)
• Whiting MJ & Tsakiropoulos P (1996) Process/microstructure studies of Mo(Si,Al)(2) and Nb(Si,Al)(2) intermetallics. PROCESSING AND FABRICATION OF ADVANCED MATERIALS IV (pp 129-137)
• Passa E, Shao G & Tsakiropoulos P (1996) Oxidation studies of Nb-17Al-xMo alloys. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 375-381)
• Upadhyaya D, Tsakiropoulos P, Ward-Close CM & Froes FH (1996) Recent advances in fiber coating technology for use in SiC/Ti-MMCs. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 225-232)
• Senkov ON, Srisukhumbowornchai N, Ovecoglu ML, Hoo N, Ward-Close CM, Goodwin P, Tsakiropoulos P & Froes FH (1996) Characterization of a Ti-48Al-2Nb-2Cr alloy synthesized from mixed gas atomized and mechanically alloyed powders. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 271-277)
• Passa E, Shao G & Tsakiropoulos P (1996) On the development of Nb-17Al-xMo alloys. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 355-362)
• Norman AF & Tsakiropoulos P (1996) Study of the microstructure and properties of spray formed Al-5Cr-1.5Zr. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 119-126)
• Shao G, Tsakiropoulos P, Loader C, Dunford D & Ward-Close MC (1996) Microstructure studies on Fe-Al laminate materials. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 149-156)
• Shao G, Passa E, Tsakiropoulos P, Miodownik AP, Manh DN & Pettifor DG (1996) Effects of Al on omega formation in transition metal intermetallic alloys. STRUCTURAL INTERMETALLICS 1997 (pp 825-830)
• Stergiou A & Tsakiropoulos P (1996) Oxidation studies on MoSi2-X (X=Al, Ta, W) alloys. STRUCTURAL INTERMETALLICS 1997 (pp 869-875)
• Keramidas P, Grosdidier T & Tsakiropoulos P (1996) Influence of Zr addition on the microstructure and properties of PM Al-8Fe-4Ni alloy. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 111-118)
• Shao G, Tsakiropoulos P & Miodownik AP (1995) Study of phase transformations in Ti-47Al-3V. GAMMA TITANIUM ALUMINIDES (pp 173-180)
• UPADHYAYA D, SANDHU S, WARDCLOSE CM, TSAKIROPOULOS P & FROES FH (1995) A COMPARISON OF SCS6 TI-6AL-4V AND SIGMA (SM1240) TI-6AL-4V COMPOSITE SYSTEMS - A REACTION KINETICS STUDY. RECENT ADVANCES IN TITANIUM METAL MATRIX COMPOSITES (pp 155-165)
• UPADHYAYA D, TSAKIROPOULOS P, WARDCLOSE CM & FROES FH (1995) EFFECT OF PROCESSING ON THE FIBER SURFACE MORPHOLOGY. RECENT ADVANCES IN TITANIUM METAL MATRIX COMPOSITES (pp 75-85)
• Brydson R, Hofer F, Upadhyaya D, Kothleitner G, Tsakiropoulos P, WardClose CM & Froes FH (1995) EELS imaging studies of fibre-reinforced metal matrix composites. ELECTRON MICROSCOPY AND ANALYSIS 1995, Vol. 147 (pp 191-194)
• UPADHYAYA D, BRYDSON R, TSAKIROPOULOS P, WARDCLOSE CM & FROES FH (1995) A COMPARISON OF SCS6 TI-6AL-4V AND SIGMA SM1240 TI-6AL-4V COMPOSITE SYSTEMS - A MICROSTRUCTURAL CHARACTERIZATION. RECENT ADVANCES IN TITANIUM METAL MATRIX COMPOSITES (pp 139-154)
• PITMAN SH & TSAKIROPOULOS P (1995) STUDY OF THE MICROSTRUCTURE AND OXIDATION OF NBSI2 BASE ALLOYS. HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VI, PTS 1 AND 2, Vol. 364 (pp 1321-1326)
• SHAO G, TSAKIROPOULOS P & MIODOWNIK AP (1995) METASTABLE PHASE TRANSFORMATIONS IN TI-40AL-10V ALLOY. HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VI, PTS 1 AND 2, Vol. 364 (pp 187-192)
• PASSA E & TSAKIROPOULOS P (1995) THE MICROSTRUCTURE OF NB3AL-MO INTERMETALLICS. HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VI, PTS 1 AND 2, Vol. 364 (pp 1353-1358)
• STERGIOU A & TSAKIROPOULOS P (1995) STUDY OF THE EFFECTS OF AL, TA, W ADDITIONS ON THE MICROSTRUCTURE AND PROPERTIES OF MOSI2 BASE ALLOYS. HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VI, PTS 1 AND 2, Vol. 364 (pp 911-916)
• SHAO G, GROSDIDIER T & TSAKIROPOULOS P (1993) TEM INVESTIGATION OF RAPIDLY QUENCHED METASTABLE GAMMA-TIAL PHASES. JOURNAL DE PHYSIQUE IV, Vol. 3(C7) (pp 465-468)
• SHAO G, GROSDIDIER T & TSAKIROPOULOS P (1993) SOLIDIFICATION AND METASTABLE PHASE-FORMATION IN CONVENTIONAL AND PLANAR FLOW CAST TI-48.8AT-PERCENT-AL-2.2AT-PERCENT-V. JOURNAL DE PHYSIQUE IV, Vol. 3(C7) (pp 377-382)
• UPADHYAYA D, BAKER MA, WARDCLOSE CM, TSAKIROPOULOS P & FROES FH (1993) INTERFACE STUDIES IN A TI-6AL-4V-SIGMA FIBER-COMPOSITE. JOURNAL DE PHYSIQUE IV, Vol. 3(C7) (pp 1717-1722)
• NORMAN AF & TSAKIROPOULOS P (1992) THE MICROSTRUCTURE AND PROPERTIES OF THE PM AL-2.6LI-1.6HF ALLOY. ALUMINIUM-LITHIUM, VOLS 1 AND 2 (pp 507-512)
• HEHMANN F & TSAKIROPOULOS P (1992) MICROSTRUCTURAL MODELING FOR THE DEVELOPMENT OF LASER-TREATED, GAS-ATOMIZED AND SPRAY-FORMED MAGNESIUM ALLOYS. MAGNESIUM ALLOYS AND THEIR APPLICATIONS (pp 535-542)
• BALIGA CB & TSAKIROPOULOS P (1992) DESIGN OF MAGNESIUM ALLOYS WITH IMPROVED CORROSION PROPERTIES. MAGNESIUM ALLOYS AND THEIR APPLICATIONS (pp 119-126)
• BALIGA CB, TSAKIROPOULOS P, WATTS JF & JEYNES C (1992) EFFECT OF PROCESSING ON THE STRUCTURE OF THE SURFACES OF MG-AL ALLOYS. MAGNESIUM ALLOYS AND THEIR APPLICATIONS (pp 191-198)
• ADKINS NJE & TSAKIROPOULOS P (1991) RAPID SOLIDIFICATION OF AL-CR-ZR-MN ALLOYS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 134 (pp 1158-1161)
• NORMAN AF & TSAKIROPOULOS P (1991) THE MICROSTRUCTURE AND PROPERTIES OF RAPIDLY SOLIDIFIED AL-HF ALLOYS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 134 (pp 1234-1237)
• BALIGA CB & TSAKIROPOULOS P (1991) THE STRUCTURE AND MORPHOLOGY OF THE CORROSION PRODUCTS FORMED ON THE SURFACES OF A RAPIDLY SOLIDIFIED MG-35 AL-ALLOY. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 134 (pp 1029-1032)
• NORMAN AF & TSAKIROPOULOS P (1991) THE MICROSTRUCTURE AND PROPERTIES OF HIGH-PRESSURE GAS-ATOMIZED AL-LI-HF ALLOY POWDERS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 134 (pp 1144-1147)
• ADKINS NJE & TSAKIROPOULOS P (1991) THE DISTRIBUTION OF HETEROGENEOUS NUCLEANTS IN AL-CR ALLOY POWDERS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 133 (pp 767-770)
• Souza AC, Rossi JL, Tsakiropoulos P, Martinez LG, Grandini CR, Ceoni FC, Mucsi CS & Correa HPS () . Materials Science Forum, Vol. 869 (pp 578-584)